．HOME > Products > CP-27CNC
GANG-TYPE

  • Special features
  • Specification
  • Operation manual

CP-27CNC SPLASH GUARD IS AVAILABLE
CP-27 CNC is the NC upgrade from the CP-27EVS High prefromance finish lathe. It's keep the original machine's durabllity and elegant exerior while automating it with servos and CNC control. CP-27CNC Gang-Type CNC toolroom lathes which comes with FANUC controller(standard) or the other controller and has gang-type tooling and linear motion guides that enables you to get the job done faster.

TOOLING HOLDER AND OPTIONAL EQUIPMENT FOR CYCLEMATIC HIGH SPEED. HIGH ACCURACY TOOLROOM LATHES


Power Collet Closer Quick Change Adjustable Holder Drill Chuck Holder Releasing Die Nut Holder Adjustable Rotary Stops Tool Holder Extension
Extended Square Shank Tool Holder Square Shank Tool Holder, Right Hand Square Shank Tool Holder, Left Handn Round Shank Tool Holder, 3 Position Round Shank Tool Holder, 6 Position ER Collet Holder




  • 127 mm (5") swing over bed
  • 27 mm (1 1/16") 5C collet capacity.
  • Fast lever collet chucking or air closer.
  • Preloaded angular contact ball bearing spindle.
  • Spindle speeds 50~6000 RPM.
  • 1 HP frequency controlled motor
  • Tooling center height 12 mm
  • Precision ball screw on X, Z-axes
  • Linear motion guides on X, Z-axes
  • X, Z-axis feed is driven by a AC servo motor.
  • X, Z-axis ball screws directly coupled to AC servo motor, minimizing backlash.
  • Fast lever collet chucking with a single movement.
  • Power collet closer is optional.
  • The spindle is mounted in high precision preloaded angular contact ball bearings eliminating radial and end play.
  • A wide variety of optional accessories to increase versatility of the machine.

CONVENIENT TOOL SLIDE CHANGE

Tool slide change is quickly accomplished by changing the entire unit. When tool slide is changed, the operator needs only to set up the first tool.

POWER COLLET CLOSER (OPTIONAL)

When requested, the lathe can be fitted with a easy type power collet closer to replace manual lever operation . This air operated collet closer features automatic chucking for upgrading working efficiency.
GANG TYPE TOOL SLIDE
  
3/8" (9.525mm) & 1/2" (12.7mm) center height is optional.
Specify 12mm
The tool slide has a T-slot for easy mounting of tool holders, which accommodate standard 12mm tool center height. 3/8" (9.525mm) & 1/2" (12.7mm) center height is optional.
1 HOLE DRILL AND SHANK HOLDER 2 HOLE DRILL AND SHANK HOLDER
3 HOLE DRILL AND SHANK HOLDER 8 HOLE DRILL AND SHANK HOLDER
6 HOLE DRILL AND SHANK HOLDER CENTER ADJUSTABLE TOOL HOLDER
DRILL AND SHANK HOLDER
(RIGHT HAND)		 DRILL AND SHANK HOLDER (LEFT HAND)
EXTENSION TOOL HOLDER A":1",2",3",4" TAP HOLDER
SQUARE HOLDER (RIGHT HAND or
LEFT HAND)		    

MODEL CP-27CNC
With Round 5C Collets 27 mm (1 1/16")
With Hexagon 5C Collets 22 mm (7/8")
With Square 5C Collets 19 mm (3/4")
With Step Chuck 27 ~ 127 mm (1 1/16" ~ 5")
Spindle Nose Diameter Ø55.5 mm
Spindle Nose I.D./O.D. 5C (10°)/4° Taper
Spindle Speeds (Variable) 50 ~ 6000 RPM
Spindle Motor 1HP
Hole Through Spindle 31.75 mm (1 1/4")
Bar Stock Diameter (5C Collet) Ø27 mm (Ø1 1/16")
Distance Between Centers No tailstock
Swing Over Bed 127 mm
Compound Slide Travel Optional X:230 mm Z:100 mm
Coolant Pump Optional
Tailstock Spindle Taper No tailstock
Net Weight (Approx) 400 kg (880 1bs.)
Gros Weight (Approx) 500 kg (1100 1bs.)
Machine Dimensions (L x W x H) 1200x1000x1900 mm(47"x40"x75")
All dimensions, specifications and machine appearance are subject to change without prior notice.